• SHENZHEN RONGPIN ELECTRONIC TECHNOLOGY CO.,LTD.                     Email:sales@rpdzkj.cn   National Service Hotline:0755 - 23574363
    Product properties

    AMLOGIC RP-RV1126K Industrial grade core board

    SHENZHEN RONGPIN ELECTRONIC TECHNOLOGY CO.,LTD.
    Contact information: 0755-235747363
    Address: 3rd Floor, Block A, Phase II, Huafeng International Robot Industrial Park, Xixiang Street, Baoan District, Shenzhen (Gushu Metro Exit C)
    Product description



     CPU BLOCK DIAGRAM





    CORE BOARD BLOCK DIAGRAM




    PRODUCT DISPLAY





    HARDWARE INDEX



    Main hardware indicators

    size

    44mm long*44mm wide*3.2mm high

    CPU

    Swiss chip RV1126K quad-core clocked at 1200MHz

    NPU

    2.0 TOPS NPUs

    Memory

    DDR4 standard 2GB optional 1GB

    memory

    EMMC 5.1 Standard 8GB Optional 16GB/32G/64G/128G

    power management

    RK809-2 supports dynamic power management

    Operating Voltage

    The input voltage is 5V and the maximum power is less than 2W (without any peripherals)

    support system

    Linux 4.19 + QT 5.12

    operating temperature

    -25 to +85 degrees

    life

    Continuous operating life is more than 5 years




    COMMONINTERFACE


    Common interface of core board

    USB interface

    Two USB, one independent OTG, one independent HOST

    UART serial port

    6 channels of TTL 3.3V level, one of which is Debug

    GPIO interface

    98 GPIO (Note: there is multiplexing function, please check the pin definition in this specification)

    PWM interface

    12 channels of PWM have 3.3V/1.8V level respectively (please check the pin definition in this specification)

    MIPI DSI display

    1 channel maximum 1920x1080 60fps

    RGB display

    1 channel RGB 888 display interface, maximum 1920x1080

    DVP camera interface

    1 channel 16-bit parallel DVP camera interface

    MIPI camera interface

    2-way MIPI CSI RAW data camera interface

    voice output

    1 channel left and right channel output, 10W power amplifier attached to the bottom plate

    Voice input

    1 channel PDM digital silicon microphone input, 1 channel analog LANE_IN input

    SDIO interface

    2 way SDIO interface, one way TF card, the other way can be connected to WIFI

    IR infrared interface

    1 channel IR infrared receiving interface

    ADC interface

    2-channel ADC interface

    I2C interface

    5-way I2C interface

    SPI interface

    2-way SPI interface

    CAN

    1 CAN bus

    Ethernet

    One RGMII PHY interface, Gigabit Ethernet

    System Upgrade

    Support local USB upgrade


    CORRENT PARAMETER TABLE


    project

    minimum

    typical

    maximum

    Power parameters

    Voltage

    4.5V

    5V

    5.5V

    ripple

    --

    50mV

    90mV

    current

    145mA

    --

    --

    supply current

    Turn-on current

    125mA

    245mA

    531mA

    No display, connect to USB camera

    175mA

    315mA

    580mA









    surroundings

    Relative humidity

    --

    65%

    75%

    Operating temperature

    -25℃

    --

    85℃

    storage temperature

    -50℃

    -0℃

    120℃




     CPU BLOCK DIAGRAM





    CORE BOARD BLOCK DIAGRAM




    PRODUCT DISPLAY





    HARDWARE INDEX



    Main hardware indicators

    size

    44mm long*44mm wide*3.2mm high

    CPU

    Swiss chip RV1126K quad-core clocked at 1200MHz

    NPU

    2.0 TOPS NPUs

    Memory

    DDR4 standard 2GB optional 1GB

    memory

    EMMC 5.1 Standard 8GB Optional 16GB/32G/64G/128G

    power management

    RK809-2 supports dynamic power management

    Operating Voltage

    The input voltage is 5V and the maximum power is less than 2W (without any peripherals)

    support system

    Linux 4.19 + QT 5.12

    operating temperature

    -25 to +85 degrees

    life

    Continuous operating life is more than 5 years




    COMMONINTERFACE


    Common interface of core board

    USB interface

    Two USB, one independent OTG, one independent HOST

    UART serial port

    6 channels of TTL 3.3V level, one of which is Debug

    GPIO interface

    98 GPIO (Note: there is multiplexing function, please check the pin definition in this specification)

    PWM interface

    12 channels of PWM have 3.3V/1.8V level respectively (please check the pin definition in this specification)

    MIPI DSI display

    1 channel maximum 1920x1080 60fps

    RGB display

    1 channel RGB 888 display interface, maximum 1920x1080

    DVP camera interface

    1 channel 16-bit parallel DVP camera interface

    MIPI camera interface

    2-way MIPI CSI RAW data camera interface

    voice output

    1 channel left and right channel output, 10W power amplifier attached to the bottom plate

    Voice input

    1 channel PDM digital silicon microphone input, 1 channel analog LANE_IN input

    SDIO interface

    2 way SDIO interface, one way TF card, the other way can be connected to WIFI

    IR infrared interface

    1 channel IR infrared receiving interface

    ADC interface

    2-channel ADC interface

    I2C interface

    5-way I2C interface

    SPI interface

    2-way SPI interface

    CAN

    1 CAN bus

    Ethernet

    One RGMII PHY interface, Gigabit Ethernet

    System Upgrade

    Support local USB upgrade


    CORRENT PARAMETER TABLE


    project

    minimum

    typical

    maximum

    Power parameters

    Voltage

    4.5V

    5V

    5.5V

    ripple

    --

    50mV

    90mV

    current

    145mA

    --

    --

    supply current

    Turn-on current

    125mA

    245mA

    531mA

    No display, connect to USB camera

    175mA

    315mA

    580mA









    surroundings

    Relative humidity

    --

    65%

    75%

    Operating temperature

    -25℃

    --

    85℃

    storage temperature

    -50℃

    -0℃

    120℃


    免费视频